 |
|
|
| SRP |
|
 General’s
SRP model door is a pan-type product, 2” thick,
made with tough 24-gauge, hot-dipped galvanized steel,
and pre-finished with an extra-heavy duty paint system
that totals 1.0 mil thick. It is available in four colors:
Arctic White, Almond, Deep Brown, and Sandstone. Optional
vinyl-backed polystyrene insulation yields an R-value
of 6.8. This type of door is used by builders of new
homes throughout the country.
Download
Product PDF for more details/designs
|
Made
with full 24 gauge steel – a minimum of 17%
thicker than most competitors’ 25 gauge doors
Authentic
wood-grain detail and a deep,
well-defined raised panel design that is
sized and spaced in a way that is proportional
to the door size. Also available flush
Durable
two-coat, baked –on polyester finish
on top of G-40 hot-dipped galvanized steel
Full
selection of window options, each frame and
insert painted to match door and minimize fading
Optional
1-1/2” thick polystyrene insulation with
plastic back gives R-value of 6.8
Ten
year limited warranty
|
| Advantage |
|
 General’s
Advantage Door is a three layer product, made with a
1-3/8” thick polystyrene core sandwiched between
two 26-gauge pre-finished steel skins. The steel is
protected by a G60 galvanizing layer topped by a heavy
duty two-coat baked–on polyester paint system.
The rated R-value is 6.3 and the door is available in
four colors: White, Almond, Brown, and Sandstone. This
door is used by custom home builders and is a very popular
replacement door.
Download
Product PDF for more details/designs
|
1-3/8”
thick polystyrene insulation bonded
between two 26 Gauge steel skins separated
by a thermal break, yielding an R-value of 6.6
Authentic
wood-grain detail and a deep,
well-defined raised panel design that is sized
and spaced in a way that is proportional to
the door size. Also available flush
Durable
two-coat, baked –on polyester finish
on top of G-60 hot-dipped galvanized steel,
inside and out
Full
selection of window options, including
insulated glass, each frame and insert painted
to matchdoor and minimize fading
Double
tongue-in groove design forms a very
tight section joint
Limited
Lifetime Warranty
|
| Hampshire |
|
 The
Hampshire Door is 1-3/4” thick, constructed of
polyurethane foam injected between two 26-gauge steel
skins. This is a super-insulated door with an R-value
of 16.0, the highest available. This model is available
in short or long panel designs (Colonial or Ranch Style)
or in a plain flush front. It is available in four colors:
White, Almond, Brown, and Sandstone. This door is used
in colder climates or on any job where insulation is
of significant importance.
Download
Product PDF for more details/designs
|
1-3/4”
thick polyurethane foam injected between
two 26 Gauge steel skins separated by a thermal
break, yielding an R-value of 16, the highest available
Available
in a standard Colonial or a Ranch
(Long Panel) raised panel design. Also available
flush
Durable
two-coat, baked –on polyester finish on
top of G-60 hot-dipped galvanized steel, inside
and out
Full
selection of window options, including
insulated glass, each frame and insert painted
to match door and minimize fading
3/8”
deep ship lap joint with dual seal between
the sections
Limited
Lifetime Warranty
|
<-Return To Products Menu
|
|
|
|
